Modern routers manufacturers have made in home wireless routers easier for non-technical consumers to connect them. The latest versions come with different color codes for ports - so it is very easy for home users to connect the necessary cables.
Moreover, it simplifies the basic default configuration settings.
So the lights are turned on wireless routers, and are able to surf the Internet. Great, but not used in full - you are missing out all the additional security features to protect your home network.
The following are the simple steps for creating and running - without much effort.
1. Have you bought the router yet?
In addition to your personal computer, this is another important item for your home team - and you will need.
If you have not bought, you could read more on forums or websites comparison technology for wireless router. Depending on the age of your router and its features, you may need to update immediately. Because some of them are only compatible with WEP encryption - and is no longer assured.
So he received his from his Internet service provider. Good deal, right? Just a word of warning - Most routers provided for free are not very rich in features.
Routers have advanced features such as automatic selection of the fastest available bands for each device frequency, and optimizing Internet connection.
We urge you to consider purchasing your own router. Two members of our highly recommended are Asus RT-AC5300, and Asus RT-AC68U. Their prices may be on the high side, but it would be an investment of once very thin. Imagine your family members using the same Internet connection without any sluggishness.
2. Tap the network
Perfect! Now, you have the router and you're ready to get connected, right? Just follow the instructions below:
Turn off the old modem
Disconnect the Ethernet cable from the computer (the same cable connected to the modem)
Now, connect the cable to the Internet port on the new router
Turn on the modem and wait for about two minutes or less
Turn on your new router, then wait two minutes to boot
Get another Ethernet cable and connect it to the network port of your computer
Now connect the other end of the Ethernet cable to the LAN port on the router
Turn on the computer
By default, most wireless routers must be able to perform the configuration automatically. So if correctly followed the steps accurately, you must be able to navigate Google or any other web site now.
3. Enter the mind of your wireless router
Once the connection is established, and the Internet is running on your computer - you can finally rub your hands and command your router to do more.
Like most routers are managed by any web browser with a default IP address, it is suggested that the router instruction manual looks to control that information crucial.
Once you have located them, you can proceed with the following steps:
Open your browser - which can be any browser
Key in the default IP address of the router in the search bar and then press Enter
You will be asked username and password manager. Do not panic - everything is documented in the manual.
Provide the credentials, and then press Enter.
And there you go - you're in the mind of your wireless router now.
4. Change the router password
Before you start exploring the different configurations available, the first thing to do is change the password for your wireless router.
Although it may be obvious to some, you will be amazed at the amount of people who do this at all. Look under your instruction manual, should have a section to show the sector to change the password.
5. Firmware Update
Regardless of the age of the router, it is always good practice to update your firmware. Because it deals with the issues that the router can have at the present stage.
Again, refer to the instruction manual for this process varies.
6. Managing IP Addresses
DHCP stands for Dynamic Host Configuration Protocol host. No matter jargon. By default, the wireless router must be set in this mode.
Basically, DHCP manages the set of IP addresses on your network. The wireless router uses the IP address given to find the computer and then to route network traffic accordingly.
If your computer or any other device does not have an IP address, a request to the router will skyrocket to provide. The wireless router will pull an IP address from the pool (also known as a scope) and then connect it to your device.
The wireless router can also assign a range of (static) to devices such as the printer fixed IP addresses. If you prefer to use this method, then follow these steps:
Access the router console (as mentioned above)
Search LAN Settings
Assign a range of IP addresses your router to use
If you want to assign IP 15 range of your wireless router addresses, and assuming that the IP address of the router is 192.168.1.1 - must be set as the start address 192.168.1.2 and the end address to 192.168.1.16.
7. Turn on Wi-Fi
Now that you have already completed the necessary (and also the most difficult part) configuration, you can start configuring your wireless network. It is a simple process and will only take a couple of minutes of your time.
First things first, connect your computer to your wireless router. You do not want any connection loss once there is any change to the configuration.
Okay, fine. We will proceed to the final steps:
Access to the router console, and search for the section labeled wireless configuration.
Activate the wireless network (If not activated yet). If you are using a dual-band wireless router, you will see two configuration options 5 GHz and 2.4 GHz. You need to set separately.
You should then be able to see the channel configuration. Make sure it is set to Auto.
The SSID (the technical term for a network name). Please change it to something you prefer, and do not leave default. All up to you, really.
Set encryption - which is very important to do so. Go through the list of encryption options, and would like to choose WPA2-PSK [AES]. Because it offers the tightest level wireless security.
Once you have selected the option, you must assign a password to it. As a rule, the password must be composed of uppercase and lowercase letters - with numbers and characters.
random mix of characters is absolutely the best. For example - AE% @ 3782 au. Be sure to keep your password in a safe place.
And there you go! The wireless router should now be online and working conditions. You can try to connect a component to it and do some surfing.
Moreover, it simplifies the basic default configuration settings.
So the lights are turned on wireless routers, and are able to surf the Internet. Great, but not used in full - you are missing out all the additional security features to protect your home network.
The following are the simple steps for creating and running - without much effort.
1. Have you bought the router yet?
In addition to your personal computer, this is another important item for your home team - and you will need.
If you have not bought, you could read more on forums or websites comparison technology for wireless router. Depending on the age of your router and its features, you may need to update immediately. Because some of them are only compatible with WEP encryption - and is no longer assured.
So he received his from his Internet service provider. Good deal, right? Just a word of warning - Most routers provided for free are not very rich in features.
Routers have advanced features such as automatic selection of the fastest available bands for each device frequency, and optimizing Internet connection.
We urge you to consider purchasing your own router. Two members of our highly recommended are Asus RT-AC5300, and Asus RT-AC68U. Their prices may be on the high side, but it would be an investment of once very thin. Imagine your family members using the same Internet connection without any sluggishness.
2. Tap the network
Perfect! Now, you have the router and you're ready to get connected, right? Just follow the instructions below:
Turn off the old modem
Disconnect the Ethernet cable from the computer (the same cable connected to the modem)
Now, connect the cable to the Internet port on the new router
Turn on the modem and wait for about two minutes or less
Turn on your new router, then wait two minutes to boot
Get another Ethernet cable and connect it to the network port of your computer
Now connect the other end of the Ethernet cable to the LAN port on the router
Turn on the computer
By default, most wireless routers must be able to perform the configuration automatically. So if correctly followed the steps accurately, you must be able to navigate Google or any other web site now.
3. Enter the mind of your wireless router
Once the connection is established, and the Internet is running on your computer - you can finally rub your hands and command your router to do more.
Like most routers are managed by any web browser with a default IP address, it is suggested that the router instruction manual looks to control that information crucial.
Once you have located them, you can proceed with the following steps:
Open your browser - which can be any browser
Key in the default IP address of the router in the search bar and then press Enter
You will be asked username and password manager. Do not panic - everything is documented in the manual.
Provide the credentials, and then press Enter.
And there you go - you're in the mind of your wireless router now.
4. Change the router password
Before you start exploring the different configurations available, the first thing to do is change the password for your wireless router.
Although it may be obvious to some, you will be amazed at the amount of people who do this at all. Look under your instruction manual, should have a section to show the sector to change the password.
5. Firmware Update
Regardless of the age of the router, it is always good practice to update your firmware. Because it deals with the issues that the router can have at the present stage.
Again, refer to the instruction manual for this process varies.
6. Managing IP Addresses
DHCP stands for Dynamic Host Configuration Protocol host. No matter jargon. By default, the wireless router must be set in this mode.
Basically, DHCP manages the set of IP addresses on your network. The wireless router uses the IP address given to find the computer and then to route network traffic accordingly.
If your computer or any other device does not have an IP address, a request to the router will skyrocket to provide. The wireless router will pull an IP address from the pool (also known as a scope) and then connect it to your device.
The wireless router can also assign a range of (static) to devices such as the printer fixed IP addresses. If you prefer to use this method, then follow these steps:
Access the router console (as mentioned above)
Search LAN Settings
Assign a range of IP addresses your router to use
If you want to assign IP 15 range of your wireless router addresses, and assuming that the IP address of the router is 192.168.1.1 - must be set as the start address 192.168.1.2 and the end address to 192.168.1.16.
7. Turn on Wi-Fi
Now that you have already completed the necessary (and also the most difficult part) configuration, you can start configuring your wireless network. It is a simple process and will only take a couple of minutes of your time.
First things first, connect your computer to your wireless router. You do not want any connection loss once there is any change to the configuration.
Okay, fine. We will proceed to the final steps:
Access to the router console, and search for the section labeled wireless configuration.
Activate the wireless network (If not activated yet). If you are using a dual-band wireless router, you will see two configuration options 5 GHz and 2.4 GHz. You need to set separately.
You should then be able to see the channel configuration. Make sure it is set to Auto.
The SSID (the technical term for a network name). Please change it to something you prefer, and do not leave default. All up to you, really.
Set encryption - which is very important to do so. Go through the list of encryption options, and would like to choose WPA2-PSK [AES]. Because it offers the tightest level wireless security.
Once you have selected the option, you must assign a password to it. As a rule, the password must be composed of uppercase and lowercase letters - with numbers and characters.
random mix of characters is absolutely the best. For example - AE% @ 3782 au. Be sure to keep your password in a safe place.
And there you go! The wireless router should now be online and working conditions. You can try to connect a component to it and do some surfing.